Mini-occupancy detector LUXOMAT® PD9-S-FC, slave with circular detection area,
ceiling mounted or directly built in lamps

Designed only for operation in combination with a master LUXOMAT® PD9-M-FP.
The investment costs can be reduced considerably.
Connection of sensor part and power supply by telephone plug RJ11 and 50 cm cable.
One master occupancy detector is necessary for controlling light and HVAC,
whereas the slightest movements are detected by the slaves in any part of the room.
No limitation of the number of the slaves.
The movement is detected independently of light level.
The slave occupancy detector operate

Technical data PD9-S-FP

Installation in parallel mode Master/Slave.
Cable length of power supply:
20cm, with colour coded stranded wires for terminal connection.
Detection area: circular 360°
Range (Ø) H=2,5m/T=18°C in m:
seated 5
walking across 10
walking towards 6
Attention: The volumetric sensitivity of the mini occupancy sensor is smaller
than those of the PD1-PD4 series due to fewer lens segments.
Power voltage: 230V~ + 6%/-10%
Power consumption: < 1W
Ambient temperature: -25°C / +50°C
Protection degree/class: IP20 / II / CE

Copyright. ©  Absolute Energy Solutions. All rights reserved.